AU-Preston: CABLE

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
SWup	detailed	11.3391	-11.3321	0.804783	0.994105	0.793647	29.2139	15.2231	0.218171	11.3321	0.195217	0.0058953	0.00484035	0.0569896	0.081222
LWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
LWup	detailed	16.3631	13.796	1.51096	0.958801	1.16292	71.8007	29.5189	0.620952	13.796	0.510958	0.0411992	0.39538	1.07322	0.0696473
Qle	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qle	detailed	34.9288	14.5937	1.59533	0.573948	6.17843	82.9791	65.5575	1.30912	14.5937	0.595327	0.426052	0.579481	0.633675	0.119017
Qh	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qh	detailed	27.0597	-11.7459	1.01567	0.898902	3.84589	14.8187	43.2398	0.453443	11.7459	0.0156745	0.101098	0.24565	0.686574	0.234767
Qtau	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qtau	detailed	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

• CABLE Qle max value of 757.7160 is greater than expected 700.0 [W/m2]

Link to variable definitions