AU-Preston: TEB-SPARTCS

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	9.11177	-9.03713	0.843735	0.995369	1.24082	22.7889	12.3142	0.179535	9.03713	0.156264	0.00463066	0.000348123	0.0199314	0.0880492
SWup	detailed	3.56364	-0.783722	0.97734	0.994815	1.12197	3.53818	4.87138	0.103193	0.783722	0.02266	0.0051851	0.0625728	0.0927068	0.0787525
LWup	baseline	18.7361	12.0559	1.49298	0.965108	8.67511	63.2796	27.5429	0.589246	12.0559	0.492973	0.0348921	0.139646	0.140722	0.122051
LWup	detailed	13.4875	13.4295	1.08753	0.990488	8.43034	21.5302	15.1798	0.168378	13.4295	0.0875327	0.0095119	0.0082362	0.0847308	0.142015
Qle	baseline	26.1987	-9.92881	0.724857	0.484181	9.72236	36.5518	45.4023	0.907465	9.92881	0.275144	0.515819	0.759094	1.29945	0.267733
Qle	detailed	24.73	-1.31702	0.851922	0.593936	5.55242	13.5949	41.2681	0.844865	1.31702	0.148079	0.406064	0.280375	0.160978	0.0811201
Qh	baseline	37.8213	33.8019	1.34388	0.94627	21.0887	122.235	57.921	0.512512	33.8019	0.343883	0.0537299	0.0411401	0.0325104	0.289252
Qh	detailed	22.7532	6.74892	1.0675	0.936093	1.91456	25.4882	35.1149	0.375494	6.74892	0.0674958	0.0639068	0.0754295	0.169251	0.148263
Qtau	baseline	0.198855	0.174408	1.31026	0.870675	0.0296658	0.35012	0.26853	0.659669	0.174408	0.310266	0.129325	0.196961	0.347501	0.231811
Qtau	detailed	0.379482	0.367825	1.97537	0.835512	0.0192404	0.955909	0.537303	1.26538	0.367825	0.975372	0.164488	0.261487	0.488975	0.317509

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

• TEB-SPARTCS Qh max value of 604.0351 is greater than expected 600.0 [W/m2]

out of range: detailed

Link to variable definitions