AU-Preston: UT&C_noirrig

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
SWup	detailed	2.99451	0.531534	1.01569	0.996127	0.523351	1.70439	4.23035	0.0900764	0.531534	0.0156953	0.00387293	0.0222599	0.051062	0.0637761
LWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
LWup	detailed	13.1382	10.2568	1.2173	0.97141	3.85123	33.9637	17.6507	0.341797	10.2568	0.217297	0.0285904	0.152798	0.232722	0.0864128
Qle	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qle	detailed	25.6571	-9.09839	0.6709	0.490932	10.9072	39.7265	44.3735	0.889592	9.09839	0.329101	0.509068	0.539848	0.781992	0.257938
Qh	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qh	detailed	31.1042	25.3888	1.30054	0.944925	15.6206	98.7178	51.1064	0.4833	25.3888	0.300542	0.0550748	0.0273367	0.065475	0.151327
Qtau	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qtau	detailed	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

• UT&C_noirrig Qh max value of 606.7099 is greater than expected 600.0 [W/m2]

Link to variable definitions