AU-SurreyHills: Manabe_1T

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	2.57933	-1.35548	0.970787	0.99532	0.573174	3.32976	4.09277	0.0996977	1.35548	0.0292129	0.00467982	0.0546051	1.02593	0.0861903
SWup	detailed	3.36568	-2.95075	0.932936	0.99532	0.602905	8.06157	5.34382	0.115019	2.95075	0.0670633	0.00467982	0.054605	1.02593	0.0904776
LWup	baseline	20.3189	20.3185	1.2383	0.97569	14.0341	40.5992	23.2838	0.342041	20.3185	0.238298	0.0243096	0.0866439	0.0970279	0.260519
LWup	detailed	20.5514	20.5512	1.22841	0.973964	14.3548	39.5551	23.467	0.340786	20.5512	0.228407	0.0260357	0.0687074	0.0497836	0.265198
Qle	baseline	19.4182	-5.27055	0.555891	0.409925	5.95665	33.8232	31.9827	0.923725	5.27055	0.444109	0.590075	0.187284	0.632385	0.221265
Qle	detailed	19.6899	-4.90569	0.554738	0.396637	6.14998	33.5527	32.1866	0.931491	4.90569	0.445262	0.603363	0.199109	0.64376	0.221482
Qh	baseline	30.5946	-21.1894	0.678602	0.79372	17.0365	78.2612	51.1988	0.619081	21.1894	0.321399	0.20628	0.213869	0.0972835	0.173587
Qh	detailed	30.7835	-20.6086	0.670397	0.786059	16.2922	80.87	51.6367	0.628879	20.6086	0.329603	0.213941	0.230838	0.10631	0.173627
Qtau	baseline	0.145062	-0.0967069	0.694107	0.840392	0.00394376	0.347654	0.226438	0.561374	0.0967069	0.305894	0.159608	0.181034	0.5121	0.15811
Qtau	detailed	0.15047	-0.108169	0.65343	0.8406	0.00209431	0.391081	0.23535	0.573083	0.108169	0.34657	0.1594	0.184124	0.523923	0.169237

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

Link to variable definitions