FI-Torni: K-UCMv1

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
SWup	detailed	12.4606	-11.7988	0.639093	0.935482	0.8806	26.8459	17.2833	0.461216	11.7988	0.360906	0.064518	0.387654	0.33417	0.168596
LWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
LWup	detailed	11.4993	10.9875	1.08217	0.989058	5.74772	16.1572	13.9196	0.174454	10.9875	0.0821726	0.0109417	0.0112462	0.422087	0.120588
Qle	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qle	detailed	16.1741	-10.2268	0.409978	0.553194	6.671	37.1341	28.624	0.845274	10.2268	0.590022	0.446806	0.181962	0.501934	0.393703
Qh	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qh	detailed	43.3828	-30.021	0.901871	0.729255	24.7893	35.0702	58.198	0.705679	30.021	0.0981307	0.270745	0.261521	2.22842	0.289242

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

• K-UCMv1 Qstor min value of -1658.2291 is less than expected -800.0 [W/m2]
• K-UCMv1 Qh max value of 1389.1405 is greater than expected 600.0 [W/m2]
• K-UCMv1 SWnet min value of -0.9085 is less than expected 0.0 [W/m2]

Link to variable definitions