JP-Yoyogi: CABLE

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
SWup	detailed	10.2595	-9.40444	0.825435	0.964184	1.5073	16.6818	13.7075	0.299333	9.40444	0.174566	0.0358157	0.296439	0.746548	0.134497
LWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
LWup	detailed	14.9674	5.22402	1.28336	0.942338	13.2951	36.4062	24.7596	0.4778	5.22402	0.283356	0.0576619	2.29212	2.42952	0.103415
Qle	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qle	detailed	59.3315	46.3896	2.96984	0.502407	1.45278	220.58	109.997	2.61454	46.3896	1.96984	0.497593	0.0370747	0.175216	0.165755
Qh	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qh	detailed	38.6289	-33.602	0.480602	0.729132	0.19829	114.303	58.665	0.728103	33.602	0.519398	0.270868	0.701697	4.10904	0.291694

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

• CABLE Qstor min value of -821.8669 is less than expected -800.0 [W/m2]
• CABLE Qle max value of 905.7581 is greater than expected 700.0 [W/m2]

Link to variable definitions