KR-Ochang: VTUF-3D

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
SWup	detailed	37.3842	-37.3839	0.303385	0.935961	2.21059	93.8286	51.1168	0.723968	37.3839	0.696616	0.0640392	0.415532	1.13005	0.154125
LWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
LWup	detailed	9.21881	-0.526802	0.960439	0.981676	6.37829	5.21699	12.1764	0.191739	0.526802	0.0395605	0.0183242	0.837993	0.0253708	0.0514717
Qle	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qle	detailed	31.8313	-28.556	0.181484	0.641397	3.42478	127.59	57.1503	0.8945	28.556	0.818516	0.358603	0.418122	0.609825	0.394965
Qh	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qh	detailed	33.8804	-16.2248	0.374739	0.699632	11.3356	110.95	55.1261	0.784902	16.2248	0.625262	0.300368	0.0256578	0.203174	0.437443

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

• VTUF-3D SWnet min value of -0.0001 is less than expected 0.0 [W/m2]

Link to variable definitions