NL-Amsterdam: Lodz-SUEB

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	13.8886	13.7841	1.46266	0.984599	1.00467	37.107	18.7192	0.509023	13.7841	0.462657	0.0154008	0.0595383	0.236022	0.0992587
SWup	detailed	3.02585	-0.215874	0.975105	0.984599	0.425967	0.928999	4.36169	0.175085	0.215874	0.0248954	0.0154008	0.0595383	0.236022	0.0586045
LWup	baseline	8.946	0.864748	1.19342	0.979986	10.0271	18.2793	11.4305	0.291856	0.864748	0.193415	0.0200141	0.0397391	0.437135	0.0996038
LWup	detailed	15.5987	15.252	1.25568	0.978214	2.60141	39.207	20.3903	0.34653	15.252	0.255676	0.0217858	0.0879299	0.267262	0.141381
Qle	baseline	26.6839	-6.52691	1.31219	0.589547	3.94498	35.3111	38.6047	1.08381	6.52691	0.312185	0.410453	0.0111074	0.781929	0.551868
Qle	detailed	28.4297	0.104343	1.4955	0.593893	3.67288	53.3638	42.4224	1.20838	0.104343	0.495498	0.406107	0.0760991	0.82718	0.558021
Qh	baseline	34.2609	-22.7493	0.72999	0.869138	3.7198	60.7179	53.0028	0.513771	22.7493	0.27001	0.130862	0.634511	0.708815	0.201137
Qh	detailed	30.6702	4.38528	0.756972	0.870651	25.3171	30.2974	47.2465	0.504866	4.38528	0.243028	0.129349	0.553785	0.752349	0.189898
Qtau	baseline	0.393278	-0.385489	0.332959	0.723662	0.0478651	1.17872	0.616642	0.793071	0.385489	0.667041	0.276338	0.315257	0.669579	0.344806
Qtau	detailed	0.292583	-0.265091	0.431695	0.7543	0.023426	0.932679	0.51706	0.731509	0.265091	0.568305	0.2457	0.257053	0.618464	0.243815

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

Link to variable definitions