PL-Narutowicza: CABLE

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
SWup	detailed	9.02914	6.2286	1.35154	0.937314	0.120011	25.167	13.2475	0.541321	6.2286	0.351542	0.0626859	0.214602	0.241123	0.136869
LWup	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
LWup	detailed	15.4371	1.40164	1.19165	0.948733	3.51945	32.714	23.2287	0.398639	1.40164	0.191648	0.0512672	1.72067	5.97153	0.13126
Qle	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qle	detailed	34.8388	3.40724	1.4841	0.501617	13.6641	59.0457	56.4836	1.30907	3.40724	0.484095	0.498383	1.80699	4.15258	0.247575
Qh	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qh	detailed	30.0559	-10.432	0.823708	0.787098	9.6744	34.0802	46.2906	0.617914	10.432	0.176294	0.212902	0.343334	1.14455	0.126889

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

out of range: detailed

• CABLE Qstor min value of -976.9758 is less than expected -800.0 [W/m2]
• CABLE Qle max value of 722.4611 is greater than expected 700.0 [W/m2]

Link to variable definitions