UK-Swindon: ASLUMv2.0

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	5.03534	4.02343	1.14778	0.990094	0.805065	12.6025	7.49264	0.211136	4.02343	0.147778	0.00990618	0.0362955	0.156815	0.0966888
SWup	detailed	2.66497	-1.48851	0.967677	0.990018	0.903143	4.23263	4.52398	0.142704	1.48851	0.0323232	0.00998245	0.0457855	0.22578	0.0745867
LWup	baseline	14.4549	13.0323	1.27937	0.974505	4.80958	33.6098	18.4865	0.378526	13.0323	0.279368	0.0254948	0.420652	0.5745	0.149065
LWup	detailed	11.1566	9.52837	1.35026	0.970497	0.807337	40.9664	18.2641	0.449841	9.52837	0.35026	0.029503	1.23204	8.99668	0.0809624
Qle	baseline	20.9372	14.8936	1.15035	0.840531	6.90601	32.7687	29.2557	0.624094	14.8936	0.150346	0.159469	0.0329329	0.0165674	0.2769
Qle	detailed	24.7954	21.7709	1.28775	0.857828	9.12215	48.3109	34.7111	0.670047	21.7709	0.28775	0.142172	0.0614088	0.0937356	0.34293
Qh	baseline	25.3073	16.3732	0.784813	0.901058	25.3994	17.7581	31.9346	0.449008	16.3732	0.215187	0.0989423	0.199344	0.460401	0.3594
Qh	detailed	21.6565	15.4393	0.883009	0.925115	18.7481	5.85704	27.9737	0.382016	15.4393	0.116991	0.0748855	0.150099	0.346997	0.297851
Qtau	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qtau	detailed	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

• ASLUMv2.0 SWup min value of -11.5294 is less than expected 0.0 [W/m2]
• ASLUMv2.0 alb min value of -0.0251 is less than expected 0.0 [1]
• ASLUMv2.0 Albedo min value of -0.0251 is less than expected 0.0 [1]

out of range: detailed

• ASLUMv2.0 SWup min value of -27.0959 is less than expected 0.0 [W/m2]
• ASLUMv2.0 alb min value of -0.0589 is less than expected 0.0 [1]
• ASLUMv2.0 Albedo min value of -0.0589 is less than expected 0.0 [1]

Link to variable definitions