UK-Swindon: ASLUMv3.1

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	4.02913	2.74876	1.01791	0.974795	0.370871	2.81384	7.33694	0.227232	2.74876	0.0179133	0.0252052	0.074809	0.196517	0.0844012
SWup	detailed	4.97162	-0.934053	0.903315	0.961379	0.46844	7.81798	8.47241	0.281285	0.934053	0.0966847	0.0386208	0.0880081	0.275117	0.082557
LWup	baseline	13.2085	11.6823	1.24663	0.980549	3.33993	29.1628	16.3597	0.330638	11.6823	0.246626	0.0194511	0.261708	0.598296	0.140241
LWup	detailed	8.19568	6.99623	1.16872	0.988044	1.04812	20.2692	10.7996	0.237515	6.99623	0.168722	0.0119556	0.309094	1.07628	0.088397
Qle	baseline	20.6886	13.0888	1.122	0.815254	5.75068	24.3488	29.5033	0.655327	13.0888	0.121999	0.184746	0.0688955	0.149675	0.251395
Qle	detailed	27.6505	24.3712	1.43214	0.845956	8.09888	64.6272	40.2028	0.79245	24.3712	0.432145	0.154044	0.0605758	0.0556843	0.321853
Qh	baseline	24.7881	12.5139	0.729454	0.892551	24.2837	29.2864	31.8438	0.479534	12.5139	0.270546	0.107449	0.209534	0.448871	0.336848
Qh	detailed	20.399	12.1399	0.857035	0.924259	17.1775	12.491	26.6021	0.38764	12.1399	0.142965	0.0757411	0.105375	0.222919	0.272863
Qtau	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qtau	detailed	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

• ASLUMv3.1 SWup min value of -20.5284 is less than expected 0.0 [W/m2]
• ASLUMv3.1 alb min value of -0.0446 is less than expected 0.0 [1]
• ASLUMv3.1 Albedo min value of -0.0446 is less than expected 0.0 [1]

out of range: detailed

• ASLUMv3.1 SWup min value of -29.0867 is less than expected 0.0 [W/m2]
• ASLUMv3.1 alb min value of -0.0632 is less than expected 0.0 [1]
• ASLUMv3.1 Albedo min value of -0.0632 is less than expected 0.0 [1]

Link to variable definitions