US-Baltimore: UCLEM

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	12.8567	10.8392	1.34396	0.967906	0.027	30.9639	18.6421	0.452297	10.8392	0.343959	0.0320936	0.166425	0.0957523	0.147495
SWup	detailed	6.4932	2.2887	1.15644	0.943057	0.2078	9.4699	13.4482	0.395187	2.2887	0.156435	0.0569425	0.819532	2.75427	0.0733329
LWup	baseline	17.4535	15.4303	1.24742	0.972709	0.459895	52.7017	25.1596	0.35959	15.4303	0.247423	0.0272908	6.43173	0.425061	0.0812164
LWup	detailed	17.3599	7.84324	1.28111	0.957857	10.9088	51.596	25.1525	0.43244	7.84324	0.281113	0.0421426	7.60485	0.610506	0.0851685
Qle	baseline	27.5195	-12.4363	0.844851	0.779864	12.6624	43.1206	47.1914	0.629313	12.4363	0.155149	0.220136	0.420579	2.09775	0.266972
Qle	detailed	27.3348	-4.57801	0.995539	0.795755	9.2864	10.2888	46.3581	0.637721	4.57801	0.00446142	0.204245	0.36215	0.845718	0.281217
Qh	baseline	35.4645	1.93265	0.71748	0.785017	23.3524	66.1669	55.2927	0.623145	1.93265	0.282521	0.214983	0.13875	1.47888	0.268843
Qh	detailed	30.6806	6.88745	0.912585	0.83359	20.6712	20.3584	49.9593	0.558003	6.88745	0.0874166	0.16641	0.0523771	0.474251	0.153597
SoilTemp	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
SoilTemp	detailed	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qtau	baseline	0.108991	0.00893636	0.760413	0.848599	0.0238201	0.16232	0.162809	0.536337	0.00893636	0.239587	0.151401	0.247985	1.64296	0.243321
Qtau	detailed	0.158827	-0.142151	0.513751	0.613839	0.00147993	0.54052	0.279964	0.795751	0.142151	0.48625	0.386161	4.9824	45.3955	0.278575

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

subset_SWup_v0-9

out of range: baseline

• UCLEM Qh max value of 695.5190 is greater than expected 600.0 [W/m2]
• UCLEM Qle min value of -1192.9636 is less than expected -700.0 [W/m2]

out of range: detailed

• UCLEM Qh max value of 747.7513 is greater than expected 600.0 [W/m2]
• UCLEM Qle max value of 713.1661 is greater than expected 700.0 [W/m2]
• UCLEM Qle min value of -1160.5034 is less than expected -700.0 [W/m2]

Link to variable definitions