AU-Preston: CM-BEM

NOTE: Results presented here are highly dependent on how models are configured in this experiment and may be subject to variable output formatting errors. Results are not intended to indicate the quality of any individual model, but to help participants better understand and improve modelling approaches in different urban environments.

Submitted metadata

• Baseline
• Detailed

Error metrics

flux	experiment	MAE	MBE	nSD	R	5th	95th	RMSE	cRMSE	AMBE	1-nSD	1-R	nSkewness	nKurtosis	Overlap
SWup	baseline	9.5281	5.88691	1.00735	0.962844	0.0725	3.0005	14.0455	0.273703	5.88691	0.0073533	0.0371563	0.408884	0.713673	0.100944
SWup	detailed	5.98474	3.06342	0.974122	0.975978	0.0159	2.7038	10.6035	0.217879	3.06342	0.025878	0.0240223	0.230494	0.298935	0.0820797
LWup	baseline	13.5074	2.27634	1.33308	0.961307	11.6162	41.2864	19.5826	0.462718	2.27634	0.333084	0.0386933	0.104504	0.0488928	0.137763
LWup	detailed	12.4301	3.20071	1.28226	0.962816	7.50471	36.6399	17.8744	0.418364	3.20071	0.282256	0.0371845	0.0717615	0.122617	0.120964
Qle	baseline	24.948	-12.5122	0.721662	0.652259	2.3928	21.8253	39.2348	0.761166	12.5122	0.278338	0.347741	0.232852	0.135577	0.227975
Qle	detailed	22.1255	-1.69118	0.915929	0.700497	5.7673	10.7411	36.4583	0.745463	1.69118	0.0840707	0.299503	0.105512	0.353226	0.143031
Qh	baseline	32.4616	17.3671	0.83917	0.903031	30.7177	21.4426	43.4178	0.434297	17.3671	0.16083	0.0969692	0.0438482	0.129976	0.364845
Qh	detailed	31.2219	6.71675	0.752895	0.890081	21.6522	49.4859	44.1283	0.475999	6.71675	0.247105	0.109919	0.0237779	0.0184425	0.353459
Qtau	baseline	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan
Qtau	detailed	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan	nan

• MAE: mean absolute error (close to 0 is better)
• MBE: mean bias error (close to 0 is better)
• NSD: ratio of model to obs standard deviation (close to 1 is better)
• R: Pearson’s correlation (close to 1 is better)
• all others: closer to 0 is better

Link to variable definitions

Albedo

Datasheet

Distributions

closure_baseline

closure_detailed

subset_Qh

subset_Qle

subset_SWup

out of range: baseline

• CM-BEM SWnet min value of -0.3225 is less than expected 0.0 [W/m2]

out of range: detailed

• CM-BEM SWnet min value of -0.2861 is less than expected 0.0 [W/m2]

Link to variable definitions